Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer

Looking for a "silver bullet" primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer, Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

• Paint Sub-Category: Primer, Shellac-Based
• Global Product Type: Building/Construction Paints & Primers
• Intended Application Environment: Interior/Exterior
• Finish/Sheen: Flat
• Color(s): White
• Color Family: White
• Volume Capacity: 1 gal
• Packaging Type: Bucket/Pail
• Binder/Vehicle Ingredient(s): Shellac
• Diluent/Solvent Ingredient(s): Denatured Alcohol; Water
• Application Method: Brush; Roller
• Recommended Level of Ventilation: Moderate
• Application Temperature Range: 0º and 90ºF
• Applicable Surface Material: Cement; Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
• Maximum Coverage Area: 500 sq ft
• Cure/Dry-Time Range: 20 min (Touch); 45 min (Handle, Re-Coat); 1-3 Days (Full Cure)
• Age Recommendation: Ages 16 and Up
• Product Biodegradability Indicator: N
• Product Compostability Indicator: N
• Pre-Consumer Recycled Content Percent: 0%
• Post-Consumer Recycled Content Percent: 0%
• Total Recycled Content Percent: 0%
• Disclaimer Statement: B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
• Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
• Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.