Zinsser® Mold Killing Primer

Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof™ paints. To fully cover over and obscure heavy stains, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended. Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

• Global Product Type: Building/Construction Paints & Primers
• Paint Sub-Category: Primer; Water-Based
• Intended Application Environment: Interior/Exterior
• Finish/Sheen: Flat
• Color(s): White
• Color Family: White
• Number of Colors: 1
• Volume Capacity: 1 gal
• Packaging Type: Bucket/Pail
• Binder/Vehicle Ingredient(s): Styrene Acrylic
• Diluent/Solvent Ingredient(s): Ethylene Glycol; Water
• Pigment/Dye/Filler Ingredient(s): Calcium Carbonate
• Application Method: Brush; Roller
• Recommended Level of Ventilation: Moderate
• Application Temperature Range: 50° to 80° F
• Applicable Surface Material: Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
• Maximum Coverage Area: 400 to 450 sq ft
• Cure/Dry-Time Range: 30 min (Touch); 1 h (Handle/Recoat); 7 days (Full Cure)
• Age Recommendation: Ages 16 and Up
• Product Biodegradability Indicator: N
• Product Biodegradability in Days: 0
• Product Compostability Indicator: N
• Compliance Standards: EPA Reg. No. 87469-1-69587
• Pre-Consumer Recycled Content Percent: 0%
• Post-Consumer Recycled Content Percent: 0%
• Total Recycled Content Percent: 0%
• Disclaimer Statement: Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
• Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
• Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.