Rust-Oleum® Commercial The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula. Paint Sub-Category: Epoxy; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Gloss; Color(s): Silver Gray.

• Paint Sub-Category: Epoxy; Water-Based
• Global Product Type: Building/Construction Paints & Primers
• Intended Application Environment: Interior/Exterior
• Finish/Sheen: Gloss
• Color(s): Silver Gray
• Color Family: Gray
• Number of Colors: 1
• Volume Capacity: 1 gal
• Packaging Type: Bucket/Pail
• Binder/Vehicle Ingredient(s): Modified Urethane Latex Epoxy
• Diluent/Solvent Ingredient(s): Glycol Ether; Water
• Application Method: Brush; Roller
• Application Temperature Range: 50° to 90° F
• Applicable Surface Material: Cement/Concrete; Drywall; Masonry; Metal; Plaster; Wood
• Maximum Coverage Area: 155 to 330 sq ft
• Cure/Dry-Time Range: 15 min (Touch); 45 min (Handle); 2 h (Recoat); 24 h (Light Foot Traffic); 3 days (Vehicle Traffic); 7 days (Full Cure)
• Age Recommendation: Ages 16 and Up
• Product Biodegradability Indicator: N
• Product Biodegradability in Days: 0
• Product Compostability Indicator: N
• Compliance Standards: USDA FSIS Regulatory Sanitation Performance Compliant; VOC Compliant
• Pre-Consumer Recycled Content Percent: 0%
• Post-Consumer Recycled Content Percent: 0%
• Total Recycled Content Percent: 0%
• Disclaimer Statement: For best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%.
• Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
• Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.