Install, configure, focus and align IP cameras with a wireless link to your tablet or phone

POINTSOURCE Wireless is a battery powered POE injector, with a wireless network link, designed to allow simple and efficient IP camera installation with live video to smartphones, tablets and laptops.

Portable POE battery pack with removable, rechargeable battery module, for site installation of IP cameras and site surveys

POINTSOURCE WIRELESS has automatic camera discovery and wireless video to your smart phone or tablet, and is ideal for powering POE IP cameras in-situ, when in-line POE is not yet available. It includes a convenient USB charging port for your phone or tablet.

Battery Powered POE Injector
Veracity's POINTSOURCE Wireless is a portable, battery-powered POE injector
providing wireless network access to the IP camera it is powering. It is connected directly to the camera using a standard Ethernet network cable

Wireless Network Access
POINTSOURCE Wireless delivers POE to the camera and connects the IP
camera to the embedded wireless access point. By logging into the wireless network, live video can be viewed wirelessly on a smartphone, laptop or tablet.

POINTSOURCE Wireless features automatic camera discovery, including ONVIF. It has a default network SSID with password and an IP address for accessing the device itself. These may be changed as required by the user. The wireless link can be switched between 2.4GHz and 5GHz. A reset function is available to reset the device to default factory settings.

The wireless LED flashes as the unit boots up and is steady when the link is available. The POE port LED shows when the camera is powered, whilst the network port LEDs indicate the wired link speed (10/100) and network activity.

Browser Connection
Upon connecting to POINTSOURCE Wireless with a wireless-network-enabled laptop, tablet or smartphone, through a browser, the user is presented with a web page, allowing configurationof thePOINTSOURCE Wireless itself and showing the IP address of the connected camera. Configuration functionality depends upon the IP camera manufacturer's supported features and functions.

The system firmware is field-upgradeable to allow updates for new features and special camera types.

CAMPOINT Smart App
Veracity provide a smart app called CAMPOINT (on iOS and Android) for IP camera configuration. This enables simple wireless viewing of video from one or more IP cameras on a smart phone or tablet. CAMPOINT runs on smart phones and tablets to make IP camera installations simple, fast and convenient to use.

• POINTSOURCE PoE Injector
• Battery Module
• Charger
• Carry Strap
• Quick Start Guide

• USB charging port: 5V, 2.1A, power only, no data
• Battery type: Maintenance-free, sealed lead-acid battery, 12V, 3.4A
• Discharge time: 6 hours continuous for a 5 watt camera (typical)
• Charger: Three-stage intelligent (14.4V / 1A / 13.8V float
• Wireless SSID: User configurable
• Wireless security: WPA2-PSK with user configurable password
• USB connector: 1 x USB Type A (power only)
• Charging connector: 2.1mm jack, centre positive (on battery module - remove to charge
• Operating temperature: 0°C to 50°C (32°F to 122°F)
• Storage temperature: -30°C to 70°C (-22°F to 158°F)
• Battery charging temperature: 0°C to 35°C (32°F to 95°F)
• Relative humidity: 20% to 85%, non-condensing

All IP cameras supporting live-viewing via browser on smart device or with RTSP url address and CAMPOINT Smart Ap

• IEEE 802.3af/at
• IEEE 802.11b/g/n/ac
• EN 55022 Class B
• FCC Part 15 Subpart B Class A + B
• ICES-003 Class B
• VCCI Class B
• C-tick S/NZS CISPR 22 Class B
• IEC/EN/UL 60950-1
• CE
• UL
• IMDG
• IATA (non-restricted, OK to transport by air) ADR
• ECHA
• DoT