Many items at NothingButSavings.com offer FREE Budget Shipping. Plus, as with many
of our competitors which do offer free shipping, we don't ask you to spend a specified
amount in order to qualify for FREE Budget Shipping.
Related Products
|
$185.68 |
|
|
|
|
$1920.87 |
|
|
|
|
$11.33 |
|
|
|
|
$16.72 |
|
|
|
|
$11.33 |
|
|
|
|
$64.99 |
|
|
|
|
$121.58 |
|
|
|
|
$75.15 |
|
|
|
|
$119.74 |
|
|
|
Product Rating
(0 Ratings)
Free Budget Shipping
Many items at NothingButSavings.com offer FREE Budget Shipping. Plus, as with many of our competitors which do offer free shipping, we don't ask you to spend a specified amount in order to qualify for FREE Budget Shipping.
How do I qualify for Free Budget Shipping?
1. Add the item(s) that qualifies for FREE Budget Shipping to your order's shopping cart.
2. If a product has our "Free Shipping" tag that item will qualify for FREE Buget Shipping regardless of its price.
3. Proceed to checkout and select Budget Shipping as your shipping option (items will take an additional 7-10 business days to ship).
4. Ship your item(s) to a valid U.S. address.
5. Then, complete your order. It's that simple!
6. FREE Budget Shipping excludes certain oversized and/or overweight items, and those products that do not include this tag.
Some items may be excluded:
If certain items in your shopping cart are not eligible for Budet Shipping then buedget Shipping will not be available and thus the offer for Free Budget Shipping will not apply.
Free Budget Shipping is not available for International orders.
SR-2 Jib Roller
The Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter.
Use the proper size pair of insert liners according to the table below:
- 3/8” wire – use no insert
- 5/16” wire – use #1 inserts
- 9/32” wire – use #2 inserts
- ¼” wire – use #3 inserts
- 7/32” wire – use #4 inserts
- 3/16” wire – use #5 inserts
The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).
Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape.
Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.
 | WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
Product images may differ from actual product appearance.
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 028026121103
- Mfr's Part #: 210003
