From the Manufacturer|
APC PNET1GB Surge Protector
- Complete protection for 10/100/1000 Base-T or PoE network system
- IEEE let-through rating of 60 volts
- Metal oxide varistor instantly responds to surges
- Fail-safe feature protects your equipment even if unit fails
- 10-year warranty
Complete Security for Ethernet and LAN Network DevicesThe PNET1GB Surge Protector, part of APC's ProtectNet series, offers complete protection to your 10/100/1000 Base-T networks and Power over Ethernet (PoE) systems in the event of unexpected surges in voltage from lightning, wiring faults, or utility problems.
IEEE Let-Through Rating of 60 Volts
Boasting an IEEE let-through rating of 60 volts, the PNET1GB is designed to prevent more than 60 volts of electricity from reaching your equipment. Since higher let-through rates can increase the risk of damage to your electronics, the 60-volt rating of the PNET1GB indicates that less voltage may strain and hinder the performance of your system.
Instantaneous Response TimeThe PNET1GB is built around a metal oxide varistor (MOV), which instantaneously diverts excess surge voltage to the ground. Because it responds in under a nanosecond, the MOV can keep your equipment running while providing complete surge protection.
Fail-safe Feature Offers Additional Protection
A thermal fuse works in conjunction with the MOV to cut the unit's connection to electrical current if it reaches a certain temperature. This means that even if the MOV is damaged by an overwhelming surge, the thermal fuse acts as a fail-safe feature, disconnecting your equipment from the power source so that excess voltage is unable to reach your network.
10-Year WarrantyThis surge protector is covered by a limited 10-year warranty.
Package ContentsPNET1GB Surge Protector, network patch cable, and user manual.
More APC Surge Protectors
|APC P8VT3 Surge Protector||APC P11VNT3 Surge Protector||APC P74 Surge Protector||APC PNET1GB Surge Protector||APC P7GB Surge Protector||APC P4WUSB Surge Protector|
The majority of all surge-induced damage is caused by surges and spikes traveling along unprotected data lines. These surges originate from a wide variety of sources, including static charge buildup and lightning strikes. Left unprotected, your data lines expose network cards, A/V components, modems and other network equipment to damaging electrical transients. Inserting a ProtectNet in your data line and connecting it to earth ground prevents back-door surges from ruining your productivity and costing you money.
Data Lines Protected (multi-line only): 1 to 8
|Current:||6.5 kA Surge Current|
|Temperature:||5°F (-15°C) to 149°F (65°C) Operating|
|Temperature:||5°F (-15°C) to 149°F (65°C) Storage|
|Humidity:||0% to 95% Relative Humidity Operating|
|Humidity:||0% to 95% Relative Humidity Storage|
|Weight (Approximate):||1.76 oz|
Standalone data-line surge suppression for network, telecommunication and PC system protection.
|Certifications & Standards:|
Product images may differ from actual product appearance.