Transition Networks Ethernet Point System 10BASE-T to 10BASE-FL Media Converter - 1 x RJ-45 , 1 x SC Duplex - 10Base-T, 10Base-FL
free shipping
Item #:
Media Converters
Retail Packaging
Transition Networks
Your Price: $121.17

General Information
Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before.

Total Number of Ports:2
Network (RJ-45):Yes
Number of Network (RJ-45) Ports:1
Number of SC Ports:1
SC Port Type:Duplex

Media & Performance
Media Type Supported:Twisted Pair
Media Type Supported:Optical Fiber
Fiber Mode Supported:Multi-mode
Maximum Distance Supported:1.24 Mile

Network & Communication
Ethernet Technology:Ethernet
Network Technology:10Base-T
Network Technology:10Base-FL

Physical Characteristics
Weight (Approximate):8 oz

Additional Information:
  • Operating temperature range for this Slide-In-Module depends on the physical characteristics and the installation configuration of the TRANSITION Networks chassis in which this Slide-In-Module will be installed. See the User's Guide for the chassis in which this Slide-In-Module will be installed for a discussion of temperature-related installation constraints.

  • AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.

  • Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management.

    Fiber Optic Connector:
  • Min TX PWR: -16.0 dBm
  • Max TX PWR: -10.0 dBm
  • RX Sensitivity: -29.5 dBm
  • Max In PWR: -7.2 dBm
  • Link Budget: 13.5 dB

    3-position Jumper:
  • Hardware: Converter mode is determined by 4-position switch settings.
  • Software: Converter mode is determined by most recently saved on-board microprocessor settings.

    4-position Switch:
  • Fiber Port (UP = enabled): Enables/disables network traffic on the fiber port.
  • Copper Port (UP = enabled): Enables/disables network traffic on the copper port.
  • AutoCross (UP = enabled): Enables/disables the AutoCross function
  • LinkAlert (UP = enabled): Enables/disables the LinkAlert function
Certifications & Standards:
  • IEEE® 802.3
  • UL Listed
  • C-UL Listed (Canada)
  • CE Mark
  • EN55022
  • EN55024
  • EN61000
  • FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A)
  • FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B)

Limited Warranty:Lifetime

Product images may differ from actual product appearance.
Be the first to review this product. Write a Review
Shipping Restrictions
  • This item cannot be shipped to PO Boxes.
  • This item can be shipped only within the U.S.

  • UPC: 648177008308 
  • Mfr's Part #: CETTF1013-105